More
Lapidary Equipment
See Rock Rascal Equipment Page
|
|
|
|
Click on Photos with Borders to see Enlarged Photo
High speed ( 3400 rpm.), 13 x12 work table, Lift out Coolant Tank, Submersible Pump, Smooth-Quiet Polyflex belt drive, Rugged cast aluminum, Large Coolant Capacity
The overhead design puts you, the user, in the best
position to see and make accurate, precision cuts. High torque 1/4hp motor makes cutting
fast and smooth. Adjustable pivot hinge eliminates all looseness and play for precision
alignment. We have personally made 100's of cuts with this saw. We like it!! YOU WILL
TOO!!
| 10" Preformer Drop Saw Complete less blade 705.00 |
10" Preformer Drop Saw Accessories
|
Vise 63.00 |
Fence 9.25 | Lamp 46.00 |
Unmatched
Cutting Speed and Precision!
The revolutionary HiBall cuts extremely fast and cool in the hardest agate or
gemstones...and with high precision. Sharp reduction in cutting time with reduced waste.
Performance proven since 1980. High torque flat belt drive is smooth and quiet. Comes with
a 6 x.012 Pro-Slicer Diamond Blade running at 4200 rpm. 11 x 13 clear work table gives you
ample work room. The coolant tank slides out for cleaning. 1/3 hp motor.
| HiBall 6" Trim Saw 470.00 |
For Jewelry Finishing or Rock Tumbling these are:
The Fastest!! the Gentlest!! the Easiest to Use!! The Easiest to Clean!! Produce Unequaled Finishes!! Use Less Energy!! Do More Work!!
All models are 2 speed for controlled finishes. Unique upper and lower eccentric weights are adjustable to run heavy loads, like steel shot. Your motor and bearings last longer because of the belt drive. These machines really do the job...Day in and day out.
| Model A | Model B | Model C | |
| Rock Capacity | 10 lbs. | 3 lbs. | 40 lbs. |
| Price | 360.00 | 180.00 | 650.00 |
Gy-Roc Vibrahone Accessories
PIGGYBACK KIT (for the Model B only)
Here's a real Extra on the Model B. You can double or triple your output by adding one or two kits. Super Economical too!! In effect, you add a second vibrator for only $18.00, and a third for only $18.00 more. Effective in all configurations. 1,2 or 3 bowls.
| PIGGYBACK KIT 19.00 |
Lapping Plate (for the
Model A only)
Add this 10" lapping plate to your Model A Gy-Roc vibrating tumbler and double your output. Polish stones in the bowl and flat lap on the plate, all at the same time!!
| LAPPING PLATE 69.00 |
FLO-THRU SYSTEM
The FLO-THRU SYSTEM for metal finishing is easily added. You simply install a FLO-THRU bowl, which has a drain and attached plastic hose. Now you can constantly flush the media during the cutdown cycles. Also makes cleanup and rinsing very easy.
| FLO-THRU BOWL | Model A (10lb) | Model B (3lb) | Model C (40lb) |
34.50 |
18.75 | 78.00 | |
| RECIRCULATION SYSTEM | (for all 3 sizes) 89.00 | |
| SUSPENSION SPRINGS | (for all 3 sizes) 3.40 |
| Model A | Model B | Model C | ||||
| Extra Bowl | 18.50 | 9.90 | 66.00 | |||
| Extra Cover | 8.70 | 3.30 | 29.50 | |||
| Drive Belts | 4.35 | 3.75 | 5.15 | |||
| C-High Bowl | 125.00 | |||||
| C-High Bowl Holddown | 5.25 | |||||
| Motor | 92.00 | 92.00 | 118.00 | |||
| Spyder Assembly | 98.00 | 45.00 | 170.00 |
You
get a perfect dome on your cab EVERY TIME with this great device. Mount in front of your
coarse grinding wheel. Cabber, set of 6 different cab heads and a roll of double
stick tape.
| Gy-Roc Cabber 36.50 | Set of 6 cab heads 4.10 | Double stick tape 3.50 |
Oil filled, for use with oil or water coolants. 180 gallons per hour
| Submersible Pump 58.00 |
all brand names, logos and registered trademarks are properties of their respective owners
All Prices are SUBJECT TO CHANGE without notice
