Return to Ace Lapidary Home Page
Click here for PRODUCT INDEX

Glues For Whatever You Need To Stick Together

Red Label HOT STUFF Yellow Label SUPER T Green Label SPECIAL T

wpe95.jpg (4901 bytes)

Industrial Strength: A very pure form of cyanoacrylate (instant glue). Oil is not added to lengthen shelf life (as many products do). You get SUPERIOR Bonds with Hot Stuff adhesives. Hot Stuff remains clear and will buff up to a high polish using the same things you use on gemstones. And yes Hot Stuff has real good shear strength.

Uses are mounting stones, fossil preparation, inlay, crack repair, doping cabs and faceted stones, repairing crystals, filling small holes in stone, treating porous gems and countless other applications.

STORAGE: Place new, Unopened bottles in the Freezer at or below 32 F. for extended shelf life. Store opened bottles at room temperature. 2 Oz. bottles have the longest shelf life at over 1 year.

Red Label HOT STUFF tm
wpe97.jpg (1623 bytes)
Thin, like water for exact fit or deep penetration.

2 oz.  4 per carton 1/2 oz. 12 per carton 1/4 oz. 12 per carton

   9.95 each

    3.60 each

   2.50 each

Yellow Label SUPER Ttm
wpe98.jpg (1687 bytes)
Thick, like syrup for filling minor gaps.

2 oz.  4 per carton 1/2 oz. 12 per carton 1/4 oz. 12 per carton

   9.95 each

   3.60 each

    2.50 each

Green Label SPECIAL Ttm
wpe4B.jpg (1433 bytes)

Real thick for filling large gaps, doesn't run.

2 oz. 4 per carton 1oz. 6 per carton
10.95 each 6.50 each

NCF Accelerator tm
wpe9B.jpg (2675 bytes)A bond accelerator for all cyanoacrylate adhesives, including Hot Stuff. Can be used before or after adhesive is applied. Especially useful when more than a drop or 2 of hot stuff is needed, as cyanoacrylate does not bond quickly in larger quantities. One spritz from the spray pump bottle is all that is needed. On close fitting parts, apply adhesive, then spray edge and NCF will cause a chain reaction bond to occur. Use very small quantities  to avoid causing the adhesive to turn white, and for economy.

NCF Accelerator (mild)

Try our NEW 6oz. Spray can. It is non-flamable and will not evaporate

2 oz.  
4 per carton
4.9 oz. 
3 per carton
18 oz.  
1 per carton
6 oz. Spray Can 
4 per carton
6.95 each 10.95 each 37.95 each 11.95

Ultra-Super Solvent

Cleanly breaks all cyanoacrylate adhesive bonds, Hot Stuff, super glue, crazy glue etc. Use for dop removal, glued fingers, spills, cleanup and  mistakes....and it Works Fast!! 100% nitromethane. Just a small amount is all that's needed.

Ultra-Super Solvent  2 oz.                            6.00

Epoxy 330

wpe54.jpg (2641 bytes) Water clear, 2 part epoxy. Hardens in about 1 hour, or 10 minutes under a heat lamp. The industry standard for doublets and triplets. 24/case  4.00 ea.


Attack

wpe5F.jpg (2948 bytes)

 

An effective solvent to dissolve cured epoxies and polyester resins. Use to unbond mistakes and for cleanup. 12/case   10.00 ea.

 


 

Opticon

wpe5D.jpg (3728 bytes)

 

A special resin that produces a permanent remedy for fractures. In many cases fractures completely disappear. High penetration is accomplished by heating. 12/case     19.50 ea.

 

 

 


3M Disc Adhesive
wpeA1.jpg (5063 bytes)
         


An instant tack adhesive that bonds discs to grinding and polishing heads. Many discs per application, and with little pad build up. High quality 3M product.
5 oz. Tube (6 per case)  9.50

3M Super Strength Adhesive

wpeA4.jpg (3916 bytes)

One part clear, all purpose adhesive for stone, metal, ceramic, fabric, leather, most plastic, and wood. 24 hour full cure time. 1 oz. tube
                                       
3.90

 

 

Return to the Top of This Page


  all brand names, logos and registered trademarks are properties of their respective owners


All Prices are SUBJECT TO CHANGE without notice